Description

SYSTEM FEATURES

1. The laboratory roll mill is a compact machine for mixing all types of plastic and rubber material. The machine is successfully used for research, development and quality control.

2. The Laboratory Roll Mills are available in different roll diameters. The basic machine allows mixing under constant working conditions. Customer requirements can be met with numbers of options.

3. Uniform temperature distribution across rollers

4.  Individual adjustable roller speed with digital RPM read out to set different friction ratios.

5. Heating of the Rolls is provided electrically with Long-Life-Cartridges.

TECHNICAL FEATURES

1. Roll Diameter - 150 mm

2. Roll Width - 360 mm

3. Working Width - 300 mm

4. Material Construction: EN 8 hardened material & with high polish chrome plated enable to resist high temp.

5. HMI touch screen with PLC controller.

6. NIP gap measurement with 0.01 mm least count.

7. Separate temperature controller & display for both the rolls.

8. Temperature Range: Upto 300°C with PID controller (Electrically Heated Rolls)

9. Motor Driven Power : 5 HP

10. Doctor blade for removal of material on entire working width area of the material.

11.  A/C Frequency drive for speed control (2 to 22 RPM) (Controllable from HMI with speed display).

12.Paint: Angle Stucture: Epoxy Paint Body Paint: Powder Coating Grey Shade.

13. Element covered by SS case for protection & long operation.

14. SS rod for manual cutting of the processed polymer. (With SS tray fitted for handling).

15. The motor driven system is equipped with the limit switch actuated for emergency stop. (Situated at knee level in front of the machine)

16. Power Requirement: 415 V AC, 50 Hz Three Phase + Neutral + proper earthing is required.

17. Available in both fix and variable speed model.