Description
Rapid and accurate hydrostatic densimeter for rubber, foam, butyl, silicone and other cured elastomeric materials.
The rubber density tester is designed for ultimate connectivity while achieving the most accurate hydrostatic rubber density results. Test queues for rubber density tests are easily programmed in Link software which may be connected to any database management system. The accomodates any rubber compound, foam, silicone, polymers or any other elastomer test specimen.
Features
- Motorized measurement operation
- Snap-in components
- Simple and rugged mechanics
- LED chamber lighting
- Computer or single button operation
- Quick software guided calibration
- Includes Link software
- Side mounted safety shields
- Needle type sample holder
- Optional anti-float bracket
- Technical Specifications
|
Standards
|
ASTM D297
ISO 2781
BS 903
|
|
Measurement Method
|
Hydro-static weighing method
|
|
Measured Data
|
Density, mass change, volume change
|
|
Weighing Range
|
0.000 to 420 grams (0.0 to 160.0 grams with optional 0.1mg resolution)
|
|
Sample Weight (typ.)
|
1.000 to 50.000 grams
|
|
Density Range
|
0.50 to 10.00 g/cm3
(lower density range possible with anti-float or needle holder)
|
|
Resolution
|
1 milligram (optional 0.1mg) / 0.00001 g/cm3
|
|
Repeatability
|
Better than ± 0.020%
|
|
Output Interfaces
|
Serial (RS232), USB 2.0 optional
|
|
Dimensions (H x W x D)
|
22.24 in x 9.84 in x 18.90 in (565 mm x 250 mm x 480 mm)
|
|
Weight
|
approx. 23 kg net
|
|
Electrical
|
90-250 V, 2 Amps, 47-63 Hz, Single phase
|
|
Options
|
- Various sample holders (basket, needle, wire pellet, clip, others...)
- Anti-float bracket
- Variable dipping speed
- Spare standard or double wall beaker
- Digital clip-on thermometer
- Auto-correction of water density (temperature sensor installed in beaker)
|